1. Type:phased array
2. Frequency: 1.0-4.0 Mhz
3. Compatible system: Sequoia 512 GI, Sequoia C512, S2000
4. Application: cardiology, transcranial
5. Condition: original, in good working condition
6. With 60 days warranty
Other Siemens probes we can offer:
Brand
Model
Compatible System
Siemens
3.5C55S
G50/X150/X300
Siemens
6C1HD
S2000
Siemens
7.5L40A
G20/G40
Siemens
7.5L75S
G20 and Prima / Adara
Siemens
C7F2
Antares/ X300 and X500
Siemens
CH4-1
Antares
Siemens
CH5-2
G40/G60/X150/X300
Siemens
CH6-2
Antares
Siemens
CX5-2
Antares/ Sonoline Elegra
Siemens
C6-2
CV70/ G50/G60/ X300/X500
Siemens
C6F3
G50/G60
Siemens
C5F1
Antares
Siemens
C8-5
X300
Siemens
P10-4
Antares
Siemens
PH4-1
Antares
Warnings and cautions of ultrasonic probe
★The ultrasonic probe is a valuable device. It must be careful in the process of use. Avoid dropping, impact, or abrasion to transducers. ★When installing or removing the probe, first switch off the power and then operate it carefully. ★Avoid rapid and extreme temperature changes, as well as lengthy exposure to direct sunlight or a strong ultraviolet light source. ★Do not use sharp objects to penetrate the acoustic lens.Once the acoustic lens is damaged, the coupling gel is easy to enter the interior of the probe and damage the piezoelectric element. ★Do not soak transducer in any liquid above the recommended level as stated in the user manual for your system, please operate according to the manufacturer's instructions, otherwise it will lead to circuit failure or even burn out. ★Do not disinfect at high temperature, because the probe is equipped with piezoelectric ceramics, high temperature will weaken the effect. ★Before use, carefully check whether the housing and cable are damaged, so as to prevent the probe from high voltage injury. ★After the probe is used, the residual coupling gel on the probe must be wiped clean to prevent rats or other animals from gnawing the lens.
