The GE LOGIQ S8 fails to start

Repair Guides · Technical article · Updated Jan 4, 2022 · I00472I1

Technical articleText-focused technical page

This page is focused on the technical note, model context and service information rather than product photography.

Page summary

Key service context for quote intake and technical review

Published in the Rongtao Medical Blog under Article.
Relevant system context: GE LOGIQ S8.
Part reference: I00472I1.
Use this page to compare product, repair and troubleshooting context before opening a quote request.

BrandGE

Model / systemLOGIQ S8

Part numberI00472I1

Content typeArticle

Technical notes

Technical body content

Failure phenomenon

When GE LOGIQ S8 is started, the startup light is on, but no signal is displayed, so it cannot be started normally.

Failure analysis

After the machine presses the on key, the display shows no signal. Consider the power supply and motherboard, and troubleshoot according to the carried accessories. After replacing the power supply, the machine can start. However, after each startup, the system reports an error, which still needs further investigation. After continuing to replace the motherboard, the system still reports an error when starting up. Unplug the BF board again and eliminate the fault.

Repair results

After replacing the power supply and removing and inserting the BF board, the fault is removed and the machine is in normal use.

Tags and related links

Current internal destinations only

Same category, brand, model or tag context