Philips IE33 ultrasonic diagnostic instrument common fault troubleshooting

Repair Guides · Technical article · Updated Aug 27, 2020 · I00099I1

Technical articleText-focused technical page

This page is focused on the technical note, model context and service information rather than product photography.

Page summary

Key service context for quote intake and technical review

Published in the Rongtao Medical Blog under Article.
Relevant system context: Philips iE33.
Part reference: I00099I1.
Use this page to compare product, repair and troubleshooting context before opening a quote request.

BrandPhilips

Model / systemiE33

Part numberI00099I1

Content typeArticle

Technical notes

Technical body content

Technical notes

Philips IE33 ultrasonic diagnostic instrument common fault troubleshooting

Fault phenomenon

The device failed to start, stopped at the "initializing hardware" screen, or error 606 was reported during startup.

Troubleshooting

The motherboard battery is dead and the BIOS Settings will automatically jump to the Default Settings, which will cause an exception to the HOST or SIP boot.Mainboard battery life is about 5 years, use a multimeter to measure the battery voltage, less than +2.85Vdc, replace the mainboard battery (HOST/SIP mainboard battery model is CR2032, UMB/EMB mainboard battery model is CR2450), and change the BIOS to Philips Settings, troubleshooting.

Tags and related links

Current internal destinations only

Same category, brand, model or tag context

Technical article